Phase One 645 AF - Manual (Page 55)


5.3 Tethered operations
When operating in a studio, connected to a computer via FireWire you
are not dependent on battery power or storage media. You can capture
directly to the Phase One Capture One Raw workflow software on
either Mac or PC, providing power to the P+ back via FireWire without
the battery or CF-card inserted.
When operating tethered you have the option of capturing the images
to the CF-card or transferring captures directly to the currently assigned
capture folder in the Capture One application on the computer hard
disk.
The display on the P+ back can either be turned off while shooting
tethered or set to display the images while they are shot, just as if
shooting untethered.
When unplugging the P+ back from the FireWire, the P+ back will default
to untethered mode, capturing to CF-card or microdrive, and using the
battery for power.
Also when capturing tethered to a laptop with 4 pin mini 1394/FireWire
without power it will require a battery in the P+ back.
With the (non P+) P 20 and P 25 it is necessary to use the Phase One
“No Firewire Power Solution” Part.# 70508 to force battery power.
Using the four menu buttons you can setup the preferences for all these
operational features.
Consult the Capture One 4 manual for detailed intro to the software