Pioneer PDR-W739 - Manual (Page 21)

21
6 Finalizing and Erasing
Erasing a CD–RW disc
Although more expensive than CD-R discs, the great advantage of
CD-RW is that the discs can be erased and reused. Various erase
options are available depending on whether or not the disc has
been finalized.
A third, special option, erases (re-initializes) the whole disc. This
process takes quite a long time to complete and should be used for
recovering damaged discs, not for erasing tracks from a healthy
disc.
Caution!
Never switch off the power during CD-RW erasing — your disc may
become unusable. If there's a power failure or you do accidently
disconnect the power, the recorder will try and re-initialize the disc
once power is restored. Unfortunately, it may not be possible to
complete the process successfully, and the disc may be damaged as
a result.
If the message CHECK DISC appears any time during any erase
process, hit eject, take out the disc, clean it, then try the erase
command again.
Be sure to remove the disc from the recorder before switching off
the power, otherwise the erase operation will not be completed.
When a non-finalized disc is loaded:
1 Press ERASE.
2 Press
41 (or ¡¢) to change
the erase option.
Switch between:
• Erase just the last track
ERASE
DISC
DISC
DISC
ALL FADER
OVER
ANA
CD-RW
1
2
3
X1
L
R
–dB
8
40 18 6 0
• Erase all tracks
ERASE
DISC
DISC
DISC
ALL FADER
OVER
ANA
CD-RW
1
2
3
X1
L
R
–dB
8
40 18 6 0
• Erase multiple tracks (erase from track ... to track ... )
ERASE
DISC
DISC
DISC
ALL FADER
OVER
ANA
CD-RW
1
2
3
X1
L
R –dB
8
40 18 6 0
Keep pressing
41 (or ¡¢) to change the
‘erase from’ track — the ‘erase to’ track is always the last
track.
• Press
7 to cancel erase here.
3 Press
6 (CD-R side).
3
- COMPACT DISC MULTI CHANGER
6 7
COMPACT DISC DIGITAL RECORDER
◊ÛB¿ˆ≥≤/
COMPACT DISC RECORDER / MULTI-CD CHANGER
CD-R CONTROL
ERASE
4 1 ¡ ¢