Pioneer PDR-W739 - Manual (Page 25)

25
7 Playback Functions
Programming a playlist
(3-CD changer)
Programming a playlist means telling the player precisely which
tracks, and in what order, you want played. You can program a
sequence of up to 30 tracks, playing tracks from any of the discs
loaded in the changer, and playing tracks more than once if you
like.
1 With all discs stopped, press
PROGRAM.
The PGM indicator lights and the display prompts you to
enter the first disc/track in the playlist:
DISC
DISC
DISC
PGM
OVER
CD-R
1
2
3
X1
L
R –dB
8
40 18 6 0
2 Enter the disc/track numbers in the
order you want them played.
Use the DISC buttons to select the disc.
Use the number buttons to select tracks:
• For track numbers 1 to 10, use the corresponding number
button.
• For track numbers over 10, press the >10 button, then enter
the track number. For example, to select track 20 press
>10, 2, then 10/0.
• You can also use the
4 and ¢ buttons to select tracks,
pressing PROGRAM after each to enter it into the playlist.
After adding a track to the playlist, the display shows the disc
and track number and the total playing time of the playlist:
DISC
DISC
DISC
PGM
OVER
TRK MIN SEC
CD-R
1
2
3
X1
L
R
–dB
8
40 18 6 0
Note: the display will not show the total playing time of
playlists that exceed 100 minutes.
4 Press
3 (6 on the front panel) to
start playback.
Clearing the playlist
Clear the playlist by either:
• pressing
7 while the disc is stopped.
• pressing PLAY MODE .
• playing a disc in the CD-R (playing a disc in the 3-CD
changer clears a CD-R playlist).
• ejecting a disc in the changer (or the CD-R disc tray to clear
a CD-R playlist).
Clearing a track from the playlist
With playback stopped, delete the last (most recently) programmed
track by pressing
CLEAR . Press repeatedly to clear several steps.
Checking what's in the playlist
When the disc is stopped you can check the contents of the playlist
using the
CHECK button. Each press steps through the playlist,
showing the step number and the corresponding disc and track
number.
Adding a track to the playlist
During playback, you can add the track currently playing to the
playlist by pressing
PROGRAM twice. If there is currently no
playlist, then one is created.
COMPACT DISC RECORDER/
MULTI-CD CHANGER
DISC 1
PROGRAM CHECK CLEAR
9
1
5
2
6
3
7
4
8
10/0 >10
DISC 2
REMOTE CONTROL UNIT
&
DISC 3
#
$ ›
Î
CD SELECT
CHECK
3-CD CONTROL
1
3
2
3
- COMPACT DISC MULTI CHANGER
PLAY MODE 4 1 ¡ ¢
6 7
COMPACT DISC DIGITAL RECORDER
◊ÛB¿ˆ≥≤/ COMPACT DISC RECORDER / MULTI-CD CHANGER