System connections – Polaroid FCM-0700A User Manual

Page 13

Advertising
background image

- 13 -

System Connections

Connecting To Antenna

Connect the supplied AM/FM antennas to listen to the radio.










• In order to improve the signal, move AM loop antenna away from system and other

equipment.

• Extend FM antenna fully.
• Keep the FM antenna as horizontal as possible after connection.
• When connecting the supplied AM loop antenna, connect two black cords to AM and

ground jacks as shown below.


• If the FM reception is poor, please use a 75Ω coaxial cable (not supplied) to connect

system to an outdoor FM antenna as above.

• If you connect the system with outdoor FM antenna, you should earth the system in

order to avoid lightning strike.

• Do not connect the earth wire to gas pipe to prevent gas explosion.

Advertising