Polaroid FCM-0700A - Manual (Page 19)

- 19 -
TV Function
Power off
To set the playback end time of the signal source use number buttons to input the
desired time in sequence of hour, minute. Press the ►, ◄ direction buttons to shift
between am and pm. When the playback of the signal source is over, the player will
enter standby mode.
Signal
Use the ►, ◄ direction buttons to select CATV, AIR, FM or AM.
Channel
Use number buttons to input the desired TV channels. In CATV signal input mode, there
are 124 channels to choose from (2-125); in AIR signal input mode, there are 68
channels to choose from (2-69).
Press the CHANNEL+/- buttons or  buttons on the remote control to select the
desired channel, or use the number buttons to input and then press the OK button to
confirm.
Note:
The function is active as long as the unit is continuously supplied with power. The unit
will automatically play the selected input signal at the set start time and enter standby
mode at the set end time each day.