Adjustments, Throttle cable freeplay – Polaris Hawkeye 2x4 User Manual

Page 108

Advertising
background image

106

ADJUSTMENTS

Throttle Cable Freeplay

Adjust throttle cable freeplay at the handlebar.
1. Locate the throttle cable adjuster

at the handlebar.

2. Squeeze the end of the rub-

ber boot and slide it far

enough to expose the end of

the inline cable adjuster.

3. Loosen the adjuster lock nut.

4. Rotate the boot to turn the

adjuster until 1.6-3.2 mm of

freeplay is achieved at the

thumb lever.

NOTE:

Move the throttle lever

back and forth while

adjusting.

5. Tighten the lock nut.
6. Squeeze the end of the rubber boot and slide it over the cable

adjuster to its original position.

NOTE:

Engine RPM should not increase when steering is turned full left or

right. Readjust cable freeplay if this occurs.

Boot

Lock Nut

Adjuster

1.6-3.2 mm

Advertising