Polaris Hawkeye 2x4 - Manual (Page 46)

44
FEATURES AND CONTROLS
All Wheel Drive (AWD) System (4X4 Models)
The AWD switch may be turned on or off while the vehicle is moving.
AWD will not engage until engine speed is below 3100 RPM. AWD
remains engaged until the switch is turned off. There is no limit to the
length of time the vehicle may remain in AWD.
If the switch is turned off while the demand drive unit is engaged, it will
not disengage until the rear wheels regain traction. Engage AWD before
getting into situations where maximum traction is needed. If the rear
wheels are spinning, release the throttle before switching to AWD.
NOTE: The override switch allows activation of AWD in reverse if the AWD
switch is on. See page 34.
AWD
When the AWD switch is on,
the Quadricycle is in four-
wheel drive and the differential
is locked, providing maximum
traction. The demand drive
unit automatically engages
when the rear wheels lose trac-
tion. When the rear wheels
regain traction, the demand drive unit automatically disengages.
2X4
When the 2X4 switch is on,
the Quadricycle is in two-
wheel drive at all times and
the differential is locked.
CAUTION
Switching to AWD while the rear wheels are spinning may cause severe drive
shaft and gearcase damage. Always switch to AWD while the rear wheels
have traction or are at rest.