Palm TUNGSTEN T2 - Manual (Page 415)

Setting Communication Preferences
401
TIP You can also create a connection with a GSM phone using the Phone Link
application. We recommend using Phone Link to create phone connections. See
Chapter 14 for details. Use the steps described in these sections only if you are
unable to create a connection with Phone Link.
To create a Bluetooth to LAN connection:
1. From the Communications Preferences list, select Connection.
2. Tap New.
3. Enter a name for the connection, such as BT to LAN.
4. Tap the Connect to pick list and select Local Network.
5. Tap the Via pick list and select Bluetooth.
6. Make sure the network access point is ready to accept a Bluetooth connection.
NOTE See the documentation included with the network access point device
for information on how to prepare it to accept a Bluetooth connection. The
documentation might refer to a Bluetooth connection as a Bluetooth pairing or
a Bluetooth link.
7. Tap the Device box.
The discovery process begins, and the discovery screen appears.
Tap here