Phoenix Gold pt1800 - Manual (Page 4)

• features
pt1250
2
● 465W per channel into 8 ohms
625W per channel into 4 ohms
● XLR and 1/4” TRS input connectors
● Accepts balanced or unbalanced lines
● Heavy-duty 5-way speaker binding posts
● Independent CH 1 and CH 2 Level Controls with
11 detented positions
● Internally configurable for Parallel Mono mode for
single channel low impedance operation
● Highly efficient Pulse Width Modulated (PWM)
power supply
● High-efficiency linear tracking output design
● Dual-stage slow power-up
● High power to weight ratio
(1250 watts/11 pounds)
● Independent CH 1/CH 2 protection circuits will
instantaneously activate if one of the
following fault conditions is detected:
Excessive High Frequency
Over Temperature
Short Circuit
D.C. Offset
● Additional protection circuitry includes:
Clipping Eliminator
AC Line Fuse
● Power Connected/Standby indicator
● 7 LED display per channel, including Power
Ready and Clip/Protect indicators
● 2-speed switchable Fan cooled
● 70-volt stereo direct drive operation