Phoenix Gold pt1800 - Manual (Page 5)

• features
3
Continuous Average Output Power, both
channels driven:
465 watts per channel
into 8 ohms from 20Hz to
20kHz, with no more than
0.5% THD; 625 watts per
channel into 4 ohms from
20Hz to 20kHz, with no
more than 0.5% THD
Parallel-mono operation:
100 watts into 4 ohms
from 20Hz to 20kHz, with
no more than 0.5% THD
70-volt stereo: 600 watts
per channel
70-volt parallel mono:
750 watts
F requency Response:
20Hz to 20kHz
(±0, -0.5 dB)
Damping Factor: >200
Input Impedance: 15 kilohms unbalanced,
each leg to ground 30
kilohms balanced
Sensitivity: 1.5 Vrms for rated power
into 4 ohms
Gain: 32 dB (± 0.5 dB)
Input Overload: +15 dBu
THD: <0.5%
IM Distortion: <0.1%
Signal-to-Noise Ratio:
>105dB, weighted, ref. to
rated power into 4 ohms
Slew Rate: 25V / µS
CMRR: >70dB @ 1kHz
Power Consumption:
1200W full power
Power Requirements:
120V AC / 60Hz (USA and
Canada) Other voltages
as required for export
Fusing: 10 amp slo-blo
(120V / 60Hz) 5 amp
slo-blo (230V / 50Hz)
Display: 7 LED indicators per
channel 1 green READY,
5 yellow SIGNAL, 1 red
CLIP / PROTECT
Size (H x W x D): 3.50” (2U) x 19” x 10.25”
89
mm x 483 mm x 273 mm
Net Weight: 11 lbs. (5.0kgs)
Shipping Weight: 15lbs. (6.8kgs)
Due to ongoing research and development, all
specifications and features effective 4/96 are
subject to change without notice.