Planet Technology VC-412 - Manual (Page 33)

VC-412 User’s Manual
29
Note: Packet throughput is polled every 6 seconds.
4.5 Reset To Default
At the Main menu, you have the options to reset the VC-412 to its factory default settings.
The Reset option will reset ALL settings back to factory default; IP Addresses, Gateway
Address, Subnet Address, Auto Refresh Time, and any other commands issued to the
VC-412 will be lost by the reset. Use this option only when there is a malfunction of the
unit that prohibits it from functioning correctly after a reboot or power cycling.
4.6 Reboot System
The Reboot System command is used to reboot the OS but does not reset or change any
settings of the VC-412 and its firmware. On some occasions you will have to reboot the
firmware. The VC-412 may function improperly after major changes, use the reboot function
to refresh the
VC-412
with the new settings.