Operations, Receive mode, Fax – receiving (cont.) – Panasonic KX-FP181E User Manual

Page 79: Copying

Advertising
background image

77

Operations

Receive mode

Problem

If you want to set the FAX ONLY, TEL/FAX or TAD/FAX
(KX-FP185 only) mode:
— Select the desired mode using feature #77 (p. 71), and
— Press

to turn on the arrow (

) on

the right of the display.

Display:

ON

If you want to set the TEL mode:
— Press

to turn off the arrow (

) on

the right of the display.

ON

The unit is not in AUTO ANSWER mode. Press

to turn on the arrow (

) on the right of

the display.

ON

AUTO ANSWER

AUTO ANSWER

AUTO ANSWER

Cause & Remedy

I cannot select the desired
receive mode.

The other party complains that
they cannot send a document.

Fax – receiving (cont.)

Problem

The other party sent a faint document. Ask them to send a
clearer copy of the document.

The thermal head is dirty. Clean it (p. 82).

Some paper has instructions recommending which side to
print on. Try turning the paper over.

Check the document of the other party.

If a blank sheet is ejected after the received document is
printed out, the receiving reduction rate is not
programmed correctly. Program the proper rate in feature
#36 (p. 68).

The other party placed the document in their fax machine
the wrong way. Check with the other party.

Cause & Remedy

The recording image is faint.

The printing quality is poor.

A blank sheet is ejected.

(continued)

Copying

Problem

You cannot make a copy during programming. Make the
copy after programming or stop the programming.

The glass or rollers are dirty. Clean them (p. 82).

The thermal head is dirty. Clean it (p. 82).

Cause & Remedy

The unit does not make a copy.

A dirty pattern or a black line
appears on the copied
document.

The copied image is distorted.

Advertising