Pioneer SUPER TUNER III D DEH-P8850MP - Manual (Page 49)

Black plate (49,1)
Front 25 to Rear 25 is displayed as the front/
rear speaker balance moves from front to rear.
# Front/Rear 0 is the proper setting when only
two speakers are used.
3 Push MULTI-CONTROL left or right to
adjust left/right speaker balance.
Each time
MULTI-CONTROL is pushed left or
right, the left/right speaker balance moves to-
wards the left or right.
Left 25 to Right 25 is displayed as the left/
right speaker balance moves from left to
right.
Using the time alignment
The time alignment lets you adjust the dis-
tance between each speaker and the listening
position.
1 Use MULTI-CONTROL to select
TA Mode.
TA Mode appears in the display.
2 Push MULTI-CONTROL left or right to
select the time alignment.
Each time
MULTI-CONTROL is pushed left or
right, time alignment is selected in the follow-
ing order:
Initial (initial)
—Custom (custom)—Auto TA
(auto-time alignment)
—OFF (off)
! Initial is the factory supplied time align-
ment.
! Custom is an adjusted time alignment that
you can create for yourself.
! Auto TA is the time alignment created by
auto TA and EQ. (Refer to Auto TA and EQ
(auto-time alignment and auto-equalizing)
on page 56.)
# Please set Auto TA appears. This indicates
that you cannot select
Auto TA if auto TA and EQ
has not been carried out.
Adjusting the time alignment
You can adjust the distance between each
speaker and the selected position.
! An adjusted time alignment is memorized
in Custom.
1 Use MULTI-CONTROL to select
TA Mode.
TA Mode appears in the display.
2 Press MULTI-CONTROL to select a unit
of distance.
Each press of
MULTI-CONTROL selects the
unit of distance in the following order:
cm (centimeter)
—inch (inch)
3 Use MULTI-CONTROL to select
Time Alignment.
Time Alignment appears in the display.
# Can't adjust TA. Set position FL/FR appears
when neither
Front Left nor Front Right is se-
lected in the position selector mode ( Position).
# When selecting OFF in TA Mode, you cannot
switch to
Time Alignment.
4 Push MULTI-CONTROL left or right to
select the speaker to be adjusted.
Each time
MULTI-CONTROL is pushed left or
right, the speaker is selected in the following
order:
6 6 6
1 1 1 1 2 2 2 2
3 3 3 4 4 4 5 5 5
1 Front speaker left
2 Front speaker right
3 Rear speaker right
4 Subwoofer right
5 Subwoofer left
6 Rear speaker left
<CRD4089-A/N>49
Audio Adjustments
En
49
English
Section
11