Peripheral Electronics MEDIA GATEWAY PXAMG PGHNI2 - Manual (Page 25)

23
Store Presets
Press and hold the “TRACK >>” button. Once in the Preset Menu turn the tune knob to
select the preset location (1-18) where you wish to store the preset. When the preset
position is displayed (for example PRE1) press “TRACK >>” to store the preset into
memory. The screen will display “PR SAVED” and your preset has been stored into
memory.
Recall Presets
Press and hold the “TRACK >>” button to enter the Preset Menu. Turn the Tune Knob
to scroll through the stored preset stations. When the desired preset is displayed, press
the “<< SEEK” button to select it.
Exit menus
Press and hold the “TRACK >>” button to exit the Preset Menu and continue playing the
current station. “EXIT” will be displayed when the button is pressed. You can also wait
the allotted 10 seconds and the menu will exit automatically.
Steering Wheel Controls
Press and hold“▲” to seek up or “▼” to seek down.
Selecting AUX Input
Entering Mode Select Menu
Press the “RADIO” button a few times until “SAT” is displayed on the
screen. Immediately turn the rotary knob to scroll through the available
sources. Once “AUX” is displayed, press the “<<SEEK” button to select it.
Selecting Factory Installed Satellite
Radio (If equipped)
Entering Mode Select Menu
Press the “RADIO” button a few times until “SAT” is displayed on the screen. Im-
mediately turn the rotary knob to scroll through the available sources. Once “SAT” is
displayed, press the “<<SEEK” button to select it.
12. QX56
iPod Operation
Entering Mode Select Menu
Press the “AM/FM/SAT” button a few times until “SAT” is displayed on the screen.
Immediately turn the Tune Knob to scroll through the available sources. Once
“IPOD” is displayed, press the “<<SEEK” button to select it.
Next Track
Turn the Tune Knob clockwise to advance to the next track.