Pioneer AVH-P4900D - Manual (Page 36)

1 Touch SETUP and LANGUAGE and then
touch AUDIO LANG.
Audio language menu is displayed and the
currently selected language is highlighted.
# To switch to the second language select
menu, touch
NEXT.
# To return to the first language select menu,
touch
PREV.
2 Touch the desired language.
The audio language is set.
# If you have selected OTHERS, refer to When
you select
OTHERS on the previous page.
Notes
! If the selected language is not recorded on
the disc, the language specified on the disc is
outputted.
! You can also switch the audio language by
touching AUDIO during playback. (Refer to
Changing audio language during playback
(Multi-audio) on page 23.)
! Even if you use AUDIO during playback to
switch the audio language, this does not af-
fect the settings here.
Setting the menu language
You can set the preferred language for dis-
plays of menus recorded on a disc.
1 Touch SETUP and LANGUAGE and then
touch MENU LANG.
A menu language menu is displayed and the
currently set language is highlighted.
# To switch to the second language select
menu, touch
NEXT.
# To return to the first language select menu,
touch
PREV.
2 Touch the desired language.
The menu language is set.
# If you have selected OTHERS, refer to When
you select
OTHERS on the previous page.
Note
If the selected language is not recorded on the
disc, the language specified on the disc is dis-
played.
Switching the assist subtitle on
or off
If assist subtitles are recorded on a DVD disc,
you can display them by turning the assist
subtitle function on.
You can turn assist subtitles on or off as de-
sired.
1 Touch SETUP and LANGUAGE and then
touch NEXT.
2 Touch A SUB TITL to turn assist subtitles
on.
# To turn the assist subtitle off, touch
A SUB TITL again.
Setting the angle icon display
You can set it up so that the angle icon ap-
pears on scenes where the angle can be
switched.
1 Touch SETUP and VISUAL to display the
DVD visual set up menu.
2 Touch M. ANGLE to turn angle icon dis-
play on.
# To turn the angle icon display off, touch
M. ANGLE again.
Setting the aspect ratio
There are two kinds of display. A wide screen
display has a width-to-height ratio (TV aspect)
of 16:9, while a regular display has a TV aspect
of 4:3. Be sure to select the correct TV aspect
for the display connected to
VIDEO OUTPUT.
Operating this unit
En
36
Section
03