Operating this unit, Setting the automatic open function, Setting the clock – Pioneer AVH-P4900D User Manual

Page 42

Advertising
background image

2

Touch c to turn rear view camera set-

ting on.

# To turn rear view camera setting off, touch d.

3

Touch b and then touch c or d to se-

lect an appropriate setting for polarity.
Each time you touch c or d it switches be-
tween the following polarity:

! BATTERY – When the polarity of the con-

nected lead is positive while the gear shift
is in REVERSE (R) position

! GND – When the polarity of the connected

lead is negative while the gear shift is in
REVERSE (R) position

Setting the automatic open
function

To prevent the display from hitting the shift
lever of an automatic vehicle when it is in

P

(park) position, or when you do not wish the
display to open/close automatically, you can
set the automatic open function in the manual
mode.
Furthermore, to adjust the LCD panel slide po-
sition, you can turn the set back on or off.

1

Touch FLP ST on the setup menu.

2

Touch a to turn the set back on and the

LCD panel slides to the back.

# Touch b to turn the set back off and the LCD
panel slides to the front.

3

Touch c or d to select the display to

open/close automatically or manually.
Touch c to select MANUAL, and you have to
press

OPEN/CLOSE to open/close the display.

Touch d to select AUTO, and the display auto-
matically opens/closes when power to this
unit is turned on.

Setting the clock

Use these instructions to set the clock.

1

Touch CLOCK ADJUST on the setup

menu.

2

Touch OFF to turn the clock display on.

ON will appear in the display instead of OFF.
Clock display is now on.

# To turn the clock display off, touch ON.

3

Touch c or d to select the segment of

the clock display you wish to set.
Each time you touch c or d it will select one
segment of the clock display:
Hour

—Minute

As you select segments of the clock display
the segment selected will be highlighted.

4

Touch a or b to set the clock.

Each time you touch a it increases the se-
lected hour or minute. Each time you touch b
it decreases the selected hour or minute.

Notes

! You can match the clock to a time signal by

touching

JUST.

— If the minute is 00 to 29, the minutes are

rounded down. (e.g.,

10:18 becomes

10:00.)

— If the minute is 30 to 59, the minutes are

rounded up. (e.g.,

10:36 becomes 11:00.)

! Even when the sources are off, the clock dis-

play appears on the display.

Operating this unit

En

42

Section

03

Advertising