Vi. batteries and charging – Pride Mobility 1400 User Manual

Page 27

Advertising
background image

Go-Chair www.pridemobility.com 27

To charge the batteries using the off-board charger:
1. Position the front of your travel chair next to a standard

electrical outlet.

2. Be certain the controller power is turned off.
3. Plug the off-board charger into the battery box charger port.

See figure 21.

NOTE: The off-board charger connector can be inserted
through a slot found on the back of the basket and located
directly in front of the battery box.

4. Plug the off-board charger into the electrical outlet.

NOTE: The LED lights on the charger indicate different char-
ger conditions at various times: charger power on, charging in
progress, and charging complete. Refer to the manual supplied
with the charger for a complete explanation of these indicators.

5. When the batteries are fully charged, disconnect the off-board

charger from the electrical outlet and then from the battery
box.

NOTE: The Go-Chair batteries can be charged when the bat-
tery box is removed from the power base.

To charge the batteries with the battery box removed from
the power base:
1. Remove the battery box from the power base. See IV.

“Assembly/Disassembly.”

2. Position the battery box next to a standard electrical outlet.

See figure 22.

3. Plug the off-board charger into the battery box charger port.
4. Plug the off-board charger into the electrical outlet.
5. When the batteries are fully charged, unplug the off-board

charger from the electrical outlet and then from the battery box.

6. Reinstall the battery box to the power base.

To charge the batteries using the XLR off-board charger port:
1. Position the front of your Go-Chair next to a standard electri-

cal outlet.

2. Be certain the controller power is turned off and the freewheel

levers are in the engaged position. See III. “Your Travel Chair.”

3. Plug the off-board charger into the off-board charger port

located on the controller. See figure 23.

4. Plug the off-board charger into the electrical outlet.
5. When the batteries are fully charged, unplug the off-board

charger from the electrical outlet and then from the controller.

Figure 21. Battery Charging Through Battery
Box

Figure 22. Battery Charging (Battery Box
Removed)

Figure 23. Battery Charging Through
Controller

V I . B A T T E R I E S A N D C H A R G I N G

Advertising