Palsonic DVDR160G - Manual (Page 15)

10
When playing CD, (S)VCD, DVD, MP3 disc, press "DISPLAY" key twice until the TV screen display the menu
of relative disc information, then move cursor to "MODE", press direction key "Right", move cursor to "Random"
and press "ENTER" key to enter random mode.
When playing CD, (S)VCD, DVD, MP3 disc, press "DISPLAY" key twice until TV screen display the menu of
relative disc information ,move "Mode", press direction key "Right", then move cursor to "Program"
and press "ENTER" key to enter disc program mode TV screen will display as follows:
move cursor to the track need to program, press "ADD I CLEAR" key to pick up the track to program column
and rearrange the orders of them. After programming the tracks, move cursor to the track in program column,
and press "ENTER" key to enter programming playback.
The full name is Time Shift. This function has the AUX in signal recorded in the HDD so that you can
control the playback speed by pressing keys like F.FWD / F.REW PAUSE etc. The recorded signal won't be
saved after power off or stand-by.
When T-Shift is ON, If set "Time buffer mode" in "Time Shift" item of the setup menu to "refresh", the
previously recorded content will be cleared after the system changes. AUX in source (including switching
TV channel); if you set that to "preserve" it will save the previously recorded content.
When T-Shift is ON, each time when you press direction key "Left" , it will skip back to 10 seconds ago
to play, each time when you press direction key "Right" , it will skip forward to 30 seconds later to play.
When T-Shift is ON, press "T-Shift" to turn off the function and the system won't save the AUX in signals.
Random
T-Shift
Programming playback
Program TRACK
TRACK 01
TRACK 02
TRACK 03
TRACK 04
TRACK 05
TRACK 06
Edit program Play List