Polaroid ProCamCamera - Manual (Page 15)

15
The date display buttons (picture
9) on the control panel allow you
the option to imprint a date and/
or time (1.8mm high) in the upper
left-hand corner of your photo-
graphs. The date display buttons
are used to set the display to Jap-
anese, U.S. or European date
mode, day-hour mode or off
mode.
To set a date:
1 Press MOD (mode) repeatedly
until the desired date mode is 1
displayed (Japanese, U.S. or Euro-
pean). The MOD (mode) button
toggles through the following
options: Japanese date, day-hour,
off, U.S. date and European date.
An M will be visible in the date
display to indicate which digit is
the month.
2 Press SEL (select) to select the
year, month or day (see blinking
digit).
3 Press SET repeatedly (or hold but-
ton) until the desired digit is dis-
played. Repeat steps 2 and 3 until
the desired year, month and day
are all set.
4 Press SEL (select) a fourth time to
lock in the date.
Setting the time (in day-hour-
minute model)
1 Press the MOD (mode) button
until the day, hour and minute
mode is displayed. The first set of
digits visible in the display is the
day of the month, followed by the
time in hours and minutes in
European (or U.S. military) time
(ex. 13:00 = 1:00 p.m.).
2 Press SEL (select) and the hours
will blink. Press SET (set) to toggle
through the hours. Press SEL
(select) again to lock-in the hour
and the minutes will blink.
3 Press SET (set) to toggle through
the minutes. Press SEL (select)
again to lock in the minutes. (The
colon will be blinking).
4 Press SEL (select) a fourth time to
lock in the desired time (starting at
the hours and minutes displayed
and zero seconds).
Date display buttons