Procam close-up lens, Attaching the lens – Polaroid ProCamCamera User Manual

Page 18

Advertising
background image

18

a

Lens

b

Lower tab

c

Positioning slot

d

Prong

e

Locking tab

f

Viewfinder window

g

Lens guard

The ProCam Close-up Lens (pic-

ture I0) allows you to take photo-

graphs 10-14 inches (25 to 36cm)

from your subject and provides a

magnification of approximately

0.4X. It can be easily attached to

your camera and can remain on

when the camera is closed.

Open the camera and face the

camera lens toward you. Hold the

camera securely. Hold the Close-

up Lens by the locking tab on the

side of the lens. Do not touch the

lenses, as fingerprints will blur

your photograph.

1

Orient the Close-up Lens onto the

front of the camera as shown in

the illustration with the word

“Polaroid” facing out.

2

Position the lens

(a)

over the cam-

era lens, first seating the lower

tab behind the lens guard

(g)

.

3

Make sure the positioning tab on

the camera fits into the position-

ing slot

(c)

.

4

Push the Close-up Lens securely

against the camera.

5

Press the upper right corner of the

Close-up Lens so the prong

(d)

fits into the camera.

6

Snap the locking tab

(e)

into the

cut-out area on the side of the

camera.

Taking a close-up picture

To measure the appropriate dis-

tance of 10-14 inches (25 to 36cm)

from your subject, stretch the shoul-

der strap taut and place the metal

rivet on the strap at the subject.

Frame your subject in the view-

finder, drop the strap,

maintain the

distance

, and shoot.

Note:

Remember to remove the

Close-up Lens when you have

completed taking your close-up

photographs. The Lens, however,

may remain on the camera when

closing it.

ProCam Close-up Lens

Attaching the lens

Advertising