Palsonic VCR9600 - Manual (Page 11)

Menu Screen/Mode Screen
Using the Menu Screen
When you press the MENU button, the menu screen is
called up. When you press the MENU button again, the
unit returns to the normal screen.
Select the item you want by using the buttons
to highlight its screen setting, then press the SHIFT>
button to move to the selected screen.
TIMER PROGRAM
CHANNEL PRESET
AMS
CLOCK SET
LANGUAGE
MODE
NOT AVAILABLE NOW
When AU position is selected, or during playback or
recording, the CHANNEL PRESET and AMS screen
cannot be selected. This message will appear, and
the normal TV screen will be restored.
On Screen Display (OSD)
You can display the on-screen information which tells
you the tape operation mode, the channel selected, the
recording speed, the tape count, or the time.
To call up the on-screen information, press the OSD
button. All information is displayed. Press the button
again to turn the display off.
P27
-1 36:59 [MON] 23:35
: PLAY
: FF
: REW
: STOP
: REC
: PAUSE
: EJECT
Even if the VCR is in OSD off mode, the superimposed
information will appear on the TV screen and multi-
display for a few seconds when you press any tape
operation button or when you select a channel. After a
few seconds, it disappears from the screen. When OSD
is on, the on-screen information remains on the screen
P 08
<-- See Page 17.
<-- See Page 9.
<-- See Page 9.
<-- See Page 7.
<-- See Page 7.
SELECT =[ V ]
ENTER =[>]
END =[MENU]
V
MENU
E-8
.