Help, Error messages, Error messages – reports – Panasonic KX-FPG381 User Manual

Page 81: Error messages – display, 1 error messages – reports, 2 error messages – display, 1 base unit, Help 79

Advertising
background image

10. Help

79

For Fax Advantage assistance, call 1-800-435-7329.

10 Help

10For Fax Advantage assistance, call 1-800-435-7329.

Error Messages

10.1 Error messages –
Reports

If a problem occurs during fax transmission or
reception, one of the following communication
messages will be printed on the sending and
journal reports (page 51).

COMMUNICATION ERROR
(Code: 40-42, 46-72, FF)

L

A transmission or reception error occurred.
Try again or check with the other party.

COMMUNICATION ERROR
(Code: 43, 44)

L

A line problem occurred. Connect the
telephone line cord to a different jack and try
again.

L

An overseas transmission error occurred. Try
using the overseas mode (feature #23 on
page 69).

DOCUMENT JAMMED

L

The document is jammed. Remove the
jammed document (page 90).

ERROR-NOT YOUR UNIT
(Code: 54, 59, 70)

L

A transmission or reception error occurred
because of a problem with the other party’s
fax machine. Check with the other party.

MEMORY FULL

L

The memory is full of received documents
due to a lack of recording paper or a
recording paper jam. Install paper (page 15)
or clear the jammed paper (page 88).

NO DOCUMENT

L

The document was not fed into the unit
properly. Re-insert the document and try
again.

OTHER FAX NOT RESPONDING

L

The other party’s fax machine is busy or has
run out of recording paper. Try again.

L

The document was not fed properly. Re-
insert the document and try again.

L

The other party’s fax machine rang too many
times. Send the fax manually (page 50).

L

The other party’s machine is not a fax
machine. Check with the other party.

L

The number you dialed is not in service.

PRESSED THE STOP KEY

L {

STOP} was pressed and fax communication

was canceled.

OK

L

Fax communication was successful.

10.2 Error messages –
Display

If the unit detects a problem, one or more of the
following messages will appear on the display.

10.2.1 Base unit

ALL MAILBOX FULL

L

There is no room left in memory to record
voice messages, or the number of recorded
messages has reached 64. Erase
unnecessary messages (page 63).

BUSY

L

The called handset is in use.

L

The handset you tried to copy directory items
to is in use.

L

The handset you are calling is too far from the
base unit.

L

Privacy mode is turned ON for the call you
tried to join (page 48).

CALL SERVICE

L

There is something wrong with the unit.
Contact our service personnel.

CHECK DOCUMENT

L

The document was not fed into the unit
properly. Re-insert the document. If
misfeeding occurs frequently, clean the
document feeder rollers (page 90) and try
again.

L

Attempted to send a document longer than
600 mm (23

5

/

8

"). Press {STOP} to remove

the document. Divide the document into two
or more sheets, and try again.

CHECK MEMORY

L

The base unit memory (telephone numbers,
parameters, etc.) has been erased. Re-
program.

CHECK PAPER

L

The unit has run out of recording paper.
Install paper and press {SET} to clear the
message.

0519_FPG381.book Page 79 Monday, May 19, 2003 6:46 PM

Advertising