Printing the pictures – Panasonic DMC-FX35 User Manual

Page 90

Advertising
background image

VQT1P09

90

Connecting to other equipment

Printing the Pictures

If you connect the camera to a printer supporting PictBridge, you can select the pictures to be
printed out and instruct that printing be started on the camera’s LCD monitor.
Preparations:
Turn on the camera and the printer.
Remove the card before printing the pictures in the built-in memory.
Perform the print quality and other settings at the printer before printing the pictures.
Set the mode dial to anything except [¨].

Connect the camera to a printer via the USB connection cable

A

(supplied).

Note

Do not use any other USB connection cables except the supplied one.

Turn the camera off before connecting or disconnecting the AC adaptor (DMW-AC5PP;
optional).

Before inserting or removing a card, turn the camera off, and disconnect the USB connection
cable.

You cannot switch between the built-in memory and the card while the camera is connected to
the printer. Disconnect the USB connection cable, insert (or remove) the card and then connect
the USB connection cable to the printer again.

The pictures recorded in clipboard mode, copy them onto a card (P69), and then print them out.

A USB connection cable (supplied)

Check the directions of the connectors, and plug them straight in or unplug them straight out.
(Otherwise the connectors may be bent out of shape which will cause trouble.)

B Align the marks, and insert.
C AC adaptor (DMW-AC5PP; optional)

Use a battery with a sufficient battery power or the AC adaptor (DMW-AC5PP; optional). If the
remaining battery power becomes low while the camera and the printer are connected, the
status indicator blinks and the alarm beeps. If this happens during printing, stop printing at
once. If not printing, disconnect the USB connection cable.

When the camera is connected to the printer, the cable disconnect prohibit icon [å] appears.
Do not disconnect the USB cable while [å] is displayed.

Press

3/4 to select [PictBridge(PTP)], and then

press [MENU/SET].

1

DC IN

AV

OUT/

DIGIT

AL

COMPONENT

OUT

C

A

B

2

USB MODE

SELECT

SET

PLEASE SELECT
THE USB MODE

PictBridge(PTP)

PC

MENU

DMC-FX35P_mst.book 90 ページ 2008年1月15日 火曜日 午前10時36分

Advertising