Panasonic WV-NM100 - Manual (Page 13)

13
Using with an Intranet (LAN)
(Connection type 2)
Connect the camera to an intranet (LAN) using an Ethernet switching hub or router when browsing camera pictures
of a camera installed in the same LAN (the intranet of a company or home).
< Connection example >
< Required hardware >
Ethernet switching hub or router
< Required cable >
Ethernet cable (category 5 straight cable)
• Use an Ethernet switching hub or router suitable for 10Base-T/100Base-TX.
• Install also a LAN card suitable for 10Base-T/100Base-TX on the PC.
• All cameras connected to the network must use their own exclusive AC adapter.
! Important
Ethernet
switching hub or router
LAN
AC adapter
To an outlet
(120 V AC)
AC adapter
To an outlet
(120 V AC)