Panasonic WV-NM100 - Manual (Page 61)

61
The [Host authentication] tab appears.
The "User authentication" page appears.
Screenshot 4
Screenshot 3
Click the [User authentication] tab.
STEP3
Begin the setting for the user authentication.
"User authentication"
Select "ON" or "OFF" to set whether to authenti-
cate users or not.
"User name"
Enter a user name of up to 32 characters.
"Password" / "Retype Password"
Enter a password for the user of at least 8 and
no more than 32 characters.
"Access level"
Select an access level from the following:
Administrator / Camera control / Live viewing
"Administrator": Authorized to operate all
functions of the camera
"Camera control": Authorized to monitor
the picture and operate on the "Alarm log
list" page and the "Camera control"
page. Not authorized to operate on the
"Basic setup" page and the "Advanced
setup" page.
"Live viewing": Authorized only to monitor
the picture. Not authorized to operate the
camera.
Click the [SET] button after completing the set-
ting.
Click the "Delete User" [
o ] button to check the
users registered in the user authentication. You
can delete the selected user by clicking the
[DEL] button below. Access level, which is sur-
rounded by “[ ]”, will appear beside the user
name registered.
Example: admin [1]
STEP5
STEP4