Panasonic DMC-LZ8 - Manual (Page 57)

57
VQT1L86
Advanced-Shooting
The setting on the AF assist lamp is
disabled.
Optical image stabilizer is fi xed to
[MODE2].
The initial setting for the AF mode is
[
] (face detection).
Sunset mode
Use to take pictures of the sunset. Sunset
color can be reproduced vividly.
The fl ash setting is fi xed to Forced
FLASH OFF [ ].
The setting on the AF assist lamp is
disabled.
ISO sensitivity is fi xed to [ISO100].
You cannot change the white balance setting.
Baby mode 1
Baby mode 2
Adjusts the exposure and tone to bring
out the healthy color of your baby’s skin.
The fl ash will be weaker than normal if you
choose to use it.
You can set two different birthdays and
names by using [BABY1] and [BABY2].
You can display the set items when
playing back the pictures and stamp
them on the recorded pictures with [TEXT
STAMP]
( P88 ) .
You can also use the [PHOTOfunSTUDIO
-viewer-] software on the included CD-
ROM to print your baby’s age. (For
details, refer to the separate operating
instructions (PDF fi le) of the software.)
Age and name display setting
1 BABY1
SET SELECT
AGE
NAME OFF
ON
SET
•
•
•
•
•
•
•
•
•
■
Select [AGE] or [NAME] using e/r and
press q.
Select [SET] using e/r and press
[MENU/SET].
When setting [Age]:
Select year / month / day using w/q and
set them using e/r.
Setting [NAME]: Enter the name (Refer
to
P 86 for details on text entry)
Press [MENU/SET]
[AGE] and [NAME] is automatically set
to [ON] and displayed on the screen
when age and name is set. To change
display/none, select [ON] or [OFF] in
[AGE] or [NAME] in step 1 above, and
press [MENU/SET].
If [ON] is selected when name or
age is not set, the setup screen is
automatically displayed.
If [AGE] or [NAME] is set to [OFF], the
age or name will not be displayed.
The focus range is 5 cm (0.17 feet)
(Wide) / 1 m (3.28 feet) (Tele) to Z.
Sensitivity will be the same as when you
have set ISO limit in intelligent ISO to
[ISO MAX400].
If you turn on the camera in [BABY1] /
[BABY2], age will be displayed for about
5 seconds.
Actual age displays depend on the
[LANGUAGE] setting.
If the age is not properly displayed, check
the clock and birthday settings.
The birthday setting can be reset with
[RESET].
( P23 )
The digital zoom cannot be used.
The initial setting for the AF mode is
[
] (face detection).
1.
2.
3.
4.
•
•
•
•
•
•
•
•
•
•
Refer to P 55 for details on selecting a scene menu.