Panasonic DMC-LZ8 - Manual (Page 65)

65
VQT1L86
Advanced-Shooting
Displaying the Time at the Travel Destination
If you set your home area and the travel
destination area when traveling abroad
etc., the local time at the travel destination
area can be displayed on the screen and
recorded on the pictures taken.
Select [CLOCK SET] to set the current
date and time in advance.
( P17 )
(Example for the program AE mode [ ])
Press [MENU/SET] and then
press w.
Press r to select the [SETUP]
menu icon
[ ] and then press q.
Press e/r to select [ WORLD
TIME] and then press q.
MENU
LCD
0
OFF
SETUP
SELECT EXIT
BATTERY TYPE
CLOCK SET
WORLD TIME
MONITOR
LCD MODE
If you are setting the world time for the
fi rst time, the message [PLEASE SET
THE HOME AREA] appears. If this
message appears, press [MENU/SET]
and then set home area from the screen
shown in step 2 in “Setting the home
area [HOME]”.
Setting the home area [HOME]
(Perform steps
1, 2 and 3.)
1 Press r to select [HOME] and then
press [MENU/SET].
MENU
SET
WORLD TIME
DESTINATION
HOME
10:00 JAN.1.2008
CANCEL A SET SELECT
•
1
2
3
•
■
2 Press w/q to select your home area and
then press [MENU/SET].
MENU
SET
10:00
GMT -5:00
Toronto
New York
Miami
Lima
CANCEL A SET SELECT
The current time is displayed on the top
left of the screen and the time difference
from GMT (Greenwich Mean Time) is
displayed on the bottom left of the screen.
If daylight saving time [
] is used at
the home area, press e. Press e again
to return to the original time.
The daylight saving time setting for the
home area does not advance the current
time. Advance the clock setting by one
hour.
Finishing setting the home area
If you are setting the home area for
the fi rst time, the screen returns to the
screen shown in step 1 of “Setting the
home area [HOME]” after you press
[MENU/SET] to set your home area.
Press [ ] to return to the screen shown
in step
3 and then press [MENU/SET] to
close the menu.
If you are setting the home area for the
second time etc., the screen returns to
the screen shown in step
3 after you
press [MENU/SET] to set your home
area. Press [MENU/SET] again to close
the menu.
•
•
•
•
•