Using the remote control, Operating range of the remote control, Recharging the remote control – Pioneer VSX-59TXi User Manual

Page 9: Setting up the remote control, Before you start 01

Advertising
background image

Before you start

01

9

En

– in extremely hot or cold areas
– in places where there is vibration or other movement
– in places that are very dusty
– in places that have hot fumes or oils (such as a kitchen)

Using the remote control

Keep the following in mind when using the remote
control:

Operating range of the remote control

• Make sure that there are no obstacles between the

remote and the remote sensor on the unit.

• The remote has a range of about 23 feet (7 meters).

• Remote operation may become unreliable if strong

sunlight or fluorescent light is shining on the unit’s
remote sensor.

• Remote controllers for different devices can interfere

with each other. Avoid using remotes for other
equipment located close to this unit.

Recharging the remote control

When the battery indicator on the remote control display
shows that the rechargeable battery is almost depleted,
recharge the remote as shown below. To make sure the
battery doesn’t run out completely, simply leave the
remote control in the recharger when not in use.

Caution

• Do not use AC adaptors other than the one supplied.

1

Connect the AC adaptor to the recharger and

plug it into an AC outlet.

2

Place the remote control on the recharger,

aligning the indent on the bottom of the remote
with the tabs on the recharger.

• When the remote control is recharging, you’ll see the

indicator appear in the upper right corner of the

display:

Note

• If the remote hasn’t been charged for awhile, the

remote control display may remain blank for several
minutes before the touch screen appears. If it
continues to remain blank, try lifting the remote
control up from the recharger and reseating it on the
recharger. If after several tries, this does not work,
see Replacing the lithium-ion batteries on page 12.

Setting up the remote control

After you have calibrated the screen and set the display
clock, use the other settings to customize your remote
control.

Note

• The remote control operations in this section are

accessed from the remote setup menu. To go to the

remote setup menu, press

from the remote

control Home menu (

):

30

30

23 feet (7m)

SETUP

HOME

1/3

SYSTEM

OFF

TV

CONT

MULTI

OPERATION

TV

/ DVD

DVR
/ LD

DVR

/ VCR1

SAT

INPUT 1

2

3

CD

TUNER

SETUP

RECEIVER

RECEIVER

Advertising