Perfectone Net Ware GW-200 User Manual
Page 12
GW-200 User Manual
12
IPN:
Use IPN’s system
Yiyang:
Use Yiyang’s system
Thinker:
Use Thinker’s system
Suntek:
Use Suntek’s system
service addr, service id
: Please put the URI (domain name/IP address)
of the server into “
service addr
”.
If “
use service
” is checked, please put the URI of gatekeeper into
“
service addr
” .The default service port is 1719. If the gatekeeper has a
GKID, please put it into “
service id
”.
If “
use service
” is not checked, to make calls through gateway, please put
the URI of the gateway into “
service addr
”. To make IP-to-IP call, please
clear this field. In both cases, the default service port is 1720.
nat traversal:
When the gateway with private IP address need
communicate with other IP phones in a different LAN or on Internet,
please select an item from dropdown list to set the proxy used by the
gateway.
disable:
Select this item when the log in server and gateway in the
same LAN, or the log in system supports the gateway working behind
the LAN.
enable:
When the system does not support gaeway working behind
the LAN, please select this item to search public IP address of the
NAT device. With this item selected, “
nat addr
”
field will be activated.
Besides, port mapping (port forwarding) needs to be properly set up
on NAT device.
citron:
With Citron private protocol used, select this item to fit into the
GnuGK system transferring the voice and signal by router.
auvtech:
Select this item with Auvtech private system used.
vida:
Select this item with Vida private system used.
aivgr:
Select this item with aivgr private system used.
nat addr:
When “
nat traversal
” is set to “
enable
”, please put the