Perfectone Net Ware GW-200 User Manual
Page 26
GW-200 User Manual
26
DHCP addressing, the gateway’s LAN parameters will
automatically be configured as soon as it is connected to the LAN
or router and powered up; 2: use PPPoE mode. Those ADSL and
Cable Modem users please select this item for it is a protocol
especially designed for them. With this system, ADSL ISP
automatically assigns all the required IP parameters to any device
connected to it when the device log on; 3: use modem mode.
Those who use gateway with modem, please set the value as 3.
set pppid XXX
With
iptype
set as
2
, use this command to set ADSL ID; with
iptype
set as
3
, use this command to set Modem ID.
set ppppin XXX
With
iptype
set as
2
, use this command to set ADSL pin; with
iptype
set as
3
, use this command to set Modem pin.
set ip XXX.XXX.XXX.XXX
With
iptype
set as
0
, use this command to set IP address of
gateway .
set subnetmask XXX.XXX.XXX.XXX
With
iptype
set as
0
, use this command to set subnet mask of
gateway.
set router XXX.XXX.XXX.XXX
With
iptype
set as
0
, use this command to set router IP of network