Panasonic SC-AK340 - Manual (Page 14)

14
RQT8043
RQTV0066
LANG - 5
LANG - 4
FRANÇAIS
DANSK
ESP
AÑOL
Timer
Setting the clock Setting the clock
This is a 24-hour clock.
1 Press [CLOCK/TIMER] to select “CLOCK”.
Each time you press the button:
➞ CLOCK ˚ PLAY
Original display
˚ REC ➞
2 ( Within 8 seconds or so )
Press [ 4, REW / ] or [¢, / FF] to set the time.
3 Press [CLOCK/TIMER] to finish setting the time.
Displaying the clock
Press [CLOCK/TIMER] once when the unit is on or in standby
mode.
The time is displayed for a few seconds.
Note:
Reset the clock regularly to maintain accuracy.
Using the play or record timer Using the play or record timer
You can set the timer to come on at a certain time to wake
you up (play timer) or to record from the radio or music port
source (record timer).
Play timer and record timer cannot be used together.
Turn the unit on and set the clock.
Timer Action
Play timer Prepare the music source you want to listen to;
cassette (DECK 2 has the priority), disc number
(1~5), radio or music port source, and set the
volume.
Record
timer Check the cassette’s erasure prevention tabs
(
\
page 12), insert the cassette in DECK 2 and
tune to the radio station (
\
page 13) or select the
music port source (
\
page 16).
1 Press [CLOCK/TIMER] to select the timer function.
Each time you press the button:
➞ CLOCK ˚ PLAY
Original display
˚ REC ➞
˚PLAY : to set the play timer
˚REC : to set the record timer
(Proceed to the next step
within 8 seconds )
2 Press [ 4, REW / ] or [¢, / FF] to set the
starting time.
Record timer indicator
Play timer indicator
Start time
3 Press [CLOCK/TIMER] to confirm.
4 Repeat steps 2 to 3 to set the finishing time.
Finish time
To activate the timer
5 Press and hold [–
˚PLAY/REC] to turn on your desired
timer.
˚ PLAY
no display (off)
˚ REC
➞
6 Press [ y] to turn off the unit.
The unit must be off for the timers to operate.
Other basic operations Other basic operations
To Action
change the
settings Repeat steps 1 to 4 and 6 (
\
see above).
change the
source or
volume 1) Press and hold [– ˚PLAY/REC] to clear the
timer indicator from the display.
2) Make changes to the source or volume.
3) Do steps 5 to 6 (
\
see above).
check the
settings Press [CLOCK/TIMER] repeatedly to select
˚PLAY or ˚REC.
cancel Press and hold [– ˚PLAY/REC] to clear the
timer indicators from the display.
If you use the unit after the timers are set
After using, check that the correct tape/disc are loaded
before turning the unit off.
RQTV0066-B.indd 14 RQTV0066-B.indd 14 11/16/05 9:37:26 AM 11/16/05 9:37:26 AM