Pioneer VSX-1016TXV-K - Manual (Page 54)

Controlling the rest of your system 11
54
En
7 Select the button for the command you want to
input.
The following remote control commands can be
selected:
• You don't need to program the receiver to switch on
or off. This is done automatically.
With Pioneer components, you don’t need to:
• program the power to switch off in a shutdown
sequence (except DVD recorders);
• program the power to switch on if it’s the source
component selected in step 3;
• program a Pioneer TV or monitor to switch on if the
input function (selected in step 2) has video input
terminals;
These take priority in multi operations (not shutdown).
8 Repeat steps 5–7 to program a sequence of up to
five commands.
9 When you’re finished, use / to select EDITEXIT
from the menu and press ENTER.
You will return to the remote control
SETUP menu. Select
* EXIT * again to exit.
Using multi operations
You can start multi operations with the receiver switched
on, or in standby.
1 Press MULTI OPE.
MULTI OP flashes in the display.
2 Press an input source button that has been set up
with a multi operation.
The receiver switches on (if it was in standby) and the
programmed multi operation is performed automatically.
Using System off
1 Press MULTI OPE.
MULTI OP flashes in the display.
2 Press SOURCE .
The command sequence you programmed will run, then
all Pioneer components will switch off
1
, followed by this
receiver.
XM RADIO
DVR 2
ANALOG
ATT
MIDNIGHT/
LOUDNESS
SB ch
DIMMER
SLEEP
SR+
+10 D.ACCESS
DIALOG E S.RETRIEVER PHASE
CLASS DISC
RECEIVER SOURCE
SYSTEM OFF
INPUT
SELECT
ENTER
TUNE
TUNE
ST ST
ENTER
TOP MENU
CATEGORY
T.EDIT DTV MENU
MENU
RETURN
GUIDE BAND
SETUP
TV DVR1 TV CTRL
CD RECEIVER TUNER CD-R
DVD
RECEIVER
TV CONTROL
SHIFT
VOL
STEREO THX STANDARD
AUTO SURR SIGNAL SEL
ADV.SURR
INPUT
SELECT TV CH
MPX
AUDIO
DISP
SUBTITLE
MULTI OPE
EFFECT/CH SEL
ACOUSTIC EQ
REC DTV ON/OFF DTV INFO
MUTE
TV VOL
REC STOP JUKEBOX
HDD
CH CH
DVD
Note
1 In order to avoid accidently switching off a DVD recorder that is currently recording, no DVD recorder power off codes are sent.
RECEIVER
SHIFT
STEREO THX STANDARD
AUTO SURR SIGNAL SEL
ADV.SURR
AUDIO
DISP
SUBTITLE
MULTI OPE
EFFECT/CH SEL
ACOUSTIC EQ
HDD
CH CH
DVD
RECEIVER SOURCE
SYSTEM OFF
INPUT
SELECT
TV DVR1 TV CTRL DVD
DVR 2 RECEIVER
SHIFT
STEREO THX STANDARD
AUTO SURR SIGNAL SEL
ADV.SURR
AUDIO
DISP
SUBTITLE
MULTI OPE
EFFECT/CH SEL
ACOUSTIC EQ
HDD
CH CH
DVD
12_controlling_system.fm 54 ページ ２００６年４月４日 火曜日 午後６時２２分