Hdmi xm radio messages, Additional information 12 – Pioneer VSX-1016TXV-K User Manual

Page 61

Advertising
background image

Additional information

12

61

En

HDMI

XM radio messages

Note

• If the unit does not operate normally due to external effects such as static electricity disconnect the power plug

from the outlet and insert again to return to normal operating conditions.

Symptom

Remedy

No picture or sound.

• If the problem still persists when connecting your HDMI component directly to your monitor, please
consult the component or monitor manual or contact the manufacturer for support.

No picture.

• Depending in the output settings of the source component, it may be outputting a video format that can’t
be displayed. Change the output settings of the source, or connect using the component, S-video or
composite jacks.

OSD does not appear.

• The OSD will not appear if you have connected using the HDMI output to your TV. Use component, S-
video, or composite connections when setting up the system.

No sound, or sound suddenly
ceases.

• Since the HDMI audio signal is sent through this receiver to your TV, you need to make separate
connections for audio if you want to hear your HDMI component through this system. See

Connecting using

HDMI

on page 41 for more on this.

• If you’ve made separate connections for audio, make sure you have assigned the analog/digital jack(s) to
the corresponding HDMI input for the component. See

Assigning the HDMI inputs

on page 47 to do this.

• Check the audio output settings of the source component.

Symptom

Cause

Action

Check Antenna

The XM antenna is not connected.

Check that the XM antenna cable is attached securely.

XM ANT ERR

A short-circuit occurring in the antenna or
surrounding antenna cable.

Make sure that there is nothing unusual with the antenna or
antenna cable. Switch the power off then back on again.

Updating

The radio is being updated with the latest
encryption code.

Wait until the encryption code has been updated. Channels
00 and 01 should function normally.

No Signal

The XM signal is too weak at the current location.

n/a

Loading

The receiver is acquiring audio or program
information.

Wait until the information has been received.

Off Air

The channel currently selected has stopped
broadcasting.

Select another channel.

CH– – –

You have selected a channel that does not exist,
or that you have not subscribed to.

The receiver will automatically switch to channel 001 (or the
last selected channel).

– – – – – – – –

There is no artist name/feature, song/program
title, or channel category associated with the
channel at this time.

No action needed.

VSX-1016TXV_KU.book.fm 61 ページ 2006年3月24日 金曜日 午後9時19分

Advertising