PSC QS2500 - Manual (Page 24)

20
QS2500
Beep/Tone/LED Settings
Power-On Alert: After power-on, the QS2500 will generate an alert signal to
indicate a successful self-test.
LED Control: After each successful bar code reading, the LED above the
QS2500 will light up.
Beep Control: After each successful bar code reading, the QS2500 will
beep.
Beep Loudness/Beep-Tone Frequency/Beep-Tone Duration: You can adjust the
loudness, tone, and duration of the good-read beep.
Visible Scan Field
Indicator
Disable 00*
30 second 01
60 second 02
90 second 03
120 second 04
150 second 05
180 second 06
Continuous 07
Option Bar Code Option
Alphanumeric
Entry
$ $
Exit