Panasonic WJ-NT304 - Manual (Page 16)

c
Insert an SD memory card into the SD memory card
slot.
v
Attach the cover and tighten the screw.
b
Close the front cover.
16
z
Open the front cover.
x
Detach the SD memory card slot cover by loosening the
screw.
Insert/Remove an SD Memory Card
LINK RCV SND
OPERATE
Network Interiace Unit WJ-NT304
Front cover
LINK RCV SND
OPERATE
SD memory card slot cover
LINK RCV SND
OPERATE
SD memory card slot
■ How to remove the SD memory card
Important:
• Before removing the SD memory card, select "Not use" for "About SD memory card" on the [SD memory card] tab of "Basic
Setup" on the setup menu first. ( ☞ Network Operating Instructions (PDF)
z
Open the SD memory card slot cover by following steps
1 and 2 of the "How to insert an SD memory card" sec-
tion.
x
Release the locked SD memory card by pushing the
card and then pull the SD memory card from the slot.
c
Attach the cover and tighten the screw.
v
Close the front cover.
■ How to insert an SD memory card
Important:
• Before inserting a SD memory card, make sure that the power of the unit is turned off.