Panasonic WJ-NT304 - Manual (Page 19)

19
Specifications
■ Network Interface Unit
Power source: 12 V DC, 1.0 A (using the supplied AC adapter)
Power consumption: Approx. 12 W
Ambient temperature: –10 °C to +50 °C {14 °F to 122 °F}* 1
Ambient humidity: Less than 90 %
Video input connectors: NTSC model: 1 V [P-P]/75
Ω (BNC x 4), NTSC composite video signal
PAL model: 1 V [P-P]/75 Ω (BNC x 4), PAL composite video signal
Video output connectors: NTSC model: 1 V [P-P]/75
Ω (BNC x 4), active loop-thru output NTSC composite video signal
PAL model: 1 V [P-P]/75 Ω (BNC x 4), active loop-thru output PAL composite video signal
Audio input connector: –10 dBV, 10 k Ω, unbalanced x 1 (RCA pin jack)
Audio output connector: –10 dBV, 600 k Ω, unbalanced x 1 (RCA pin jack)
Serial port: 9-pin D-sub connector x 1 (For remote setup)
RS-485, x1 (RJ-11) (For external device control)
Parallel port: Input x 4* 2 , output x 4* 3 , AUX output x 1* 3 , Time adjust input x 1* 2
Resolution: 640 (H) x 480 (V) / 320 (H) x 240 (V) selectable
Image compression method: JPEG/MPEG-4
Audio compression method: G.726
Protocol: HTTP1.1, RTP, TCP/IP, UDP/IP, FTP (server and client), SMTP, DHCP, DNS, DDNS, NTP, SNMP
Camera control: Pan and tilt/zoom and focus/preset positions/auto focus
(When using Panasonic combination dome cameras)
Network: 10BASE-T/100BASE-TX, RJ-45 connector
Security: Password
OS: Microsoft ® Windows ® 2000 Professional SP4, Windows ® XP Home Edition SP2, Windows ® XP
Professional SP2
Browser: Microsoft ® Internet Explorer ® 6.0 SP2
Microsoft ® Internet Explorer ® 6.0 SP1 only when using Windows ® 2000 Professional SP4
Compatible SD memory card is as follows. (Optional)
Manufactured by Panasonic (Performance with this unit has been checked.)
Capacity:64 MB, 128 MB, 256 MB, 512 MB, 1 GB, 2 GB (SDHC memory card is not supported.)
Dimensions: 210 (W) x 44 (H) x 307 (D) mm {8.27" (W) x 1.73” (H) x 12.09” (D)}
(excluding rubber feet and projections)
Weight: Approx. 2.0 k g {4.4 lbs.}
■ AC Adapter
Power Source: 100 V AC to 240 V AC, 50 Hz/60 Hz
Output voltage: 12 V DC
Output current capacity: 4.58 A
Dimensions: 120 mm (W) x 60 mm (H) x 35 mm (D) {4.72" (W) x 2.36" (H) x 1.38" (D)} (excluding the DC cable)
Weight: 0.35 k g {0.77 lbs.}
* 1 When using this product without turning the power off
* 2 Non-voltage make contact input, 50 k Ω +5 V DC pull-up
* 3 Open Collector output, +24 V, 100 mA maximum
Standard Accessories
CD-ROM* .................................................................... 1 pc.
Operating Instructions (this book) .............................. 1 pc.
Warranty card (NTSC model only) ............................. 1 pc.
* The CD-ROM contains the operating instructions (PDFs
and the software).
The following are for installation.
AC adapter* ................................................................ 1 pc.
Code label .................................................................. 1 pc.
Power cord*
NTSC model ............................................................... 1 pc.
PAL model .................................................................. 2 pcs.
* Use the power cord that is suited to your locality.