Panasonic PV-DM2792 - Manual (Page 23)

23
TV Operation
Receivable Broadcast Types
The following are possible audio broadcast types and
on-screen displays. The signal being received is indicated
with an “ ” mark while the selected audio mode is indicated
with an arrow. To change the audio mode for these
broadcasts, see the “Select Audio Mode for TV Viewing”
section (below.)
Press DISPLAY to display
the broadcast signal being received.
MTS Stereo and SAP broadcast
Multi-channel Television Sound Stereo
(main language) and Secondary Audio
Program (sub language) broadcasts are
being received simultaneously.
Select the STEREO or SAP audio mode.
MTS Stereo broadcast
Multi-channel Television Sound Stereo
broadcast. Select STEREO audio mode.
• If stereo broadcast is weak and the
display flickers, select MONO audio
mode for possibly better results.
SAP broadcast
Secondary Audio Program
(sub language).
Select SAP audio mode for the sub
language.
Audio Mode for TV Viewing
Press AUDIO to select the desired audio mode
as described above.
(Arrow shows selection.)
• Each press of AUDIO will change the audio mode as shown
below.
• “SAP” is selected with first press of AUDIO.
MTS Broadcast / TV Stereo System
MONO broadcast
Normal monaural sound broadcast.
STOP 1 2 : 0 0AM ABC
0 : 0 0 : 0 0
SP STEREO
SAP
MONO
STOP 1 2 : 0 0AM ABC
0 : 0 0 : 0 0
SP STEREO
SAP
MONO
STOP 1 2 : 0 0AM ABC
0 : 0 0 : 0 0
SP STEREO
SAP
MONO
STOP 1 2 : 0 0AM ABC
0 : 0 0 : 0 0
SP STEREO
SAP
MONO
< Example >
STOP 1 2 : 0 0AM ABC
0 : 0 0 : 0 0
SP STEREO
SAP
MONO
Press AUDIO
Press AUDIO
Press AUDIO
Equipped with ® -TV Noise
Reduction for true MTS
reproduction.
® -TV Noise
Reduction is required for good
stereo separation and audio fidelity.
® is a registered trademark, and
is licensed by ® Technology
Licensing.
STOP 1 2 : 0 0AM ABC
0 : 0 0 : 0 0
SP STEREO
SAP
MONO
STOP 1 2 : 0 0AM ABC
0 : 0 0 : 0 0
SP STEREO
SAP
MONO