Panasonic PV-DM2792 - Manual (Page 34)

34
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Search System is ...
Each time a recording is made, an invisible index mark is placed on the tape.
When timer recordings are made, program index and information are also included.
These index marks can be used to access or scan recordings.
Tape Operation
Index Search
Go directly to the desired recording.
• Make each entry within 5 minutes,
or the Index Search mode will be
canceled.
• If Index Search is started very close
to an index mark, that index mark
may not be counted in the search.
NOTE: indicates start points of each recording.
6 1 7
7
2 3 4
To calculate the Index Number
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
1 7 5
5
3 4 6 2
Example 2:
To go to rec. 6 from rec. 2, enter 4 and press FF.
REW
FF
Notes
To cancel, press PLAY or STOP.
1 Press SEARCH*
in Playback or
Stop mode to
display INDEX
SEARCH screen,
and then press
NUMBER Keys to
select the
recording number.
To calculate number, •
see below.
Press FF or REW
to start search.
Play begins at
search end. To
search forward or
back 1 index,
press FF or REW
while screen left in
displayed (10 sec.).
ENTER I NDEX NUMBER : 1
US I NG 1- 9 KEYS
FORWARD SEARCH : FF
REVERSE SEARCH : REW
NEXT : SEARCH
EX I T : STOP
I NDEX SEARCH
FORWARD SEARCH : FF
REVERSE SEARCH : REW
I NDEX SEARCH
2
■