Panasonic NV-FJ730 - Manual (Page 18)

18
Recording from an external source
This function can be used to make up an edited tape from
other recordings or video sources.
A new scene can be added to the end of previous one.
A.D AV2 IN L AUDIO VIDEO R PAUSE/STILL
POWER SERCH PICTURE MODE TAPE RIFRESH
I N
OUT
RF OUT IN (AV1)
A.DUB AV2 IN L AUDIO VIDEO R PAUSE/STILL
POWER SERCH PICTURE MODE TAPE RIFRESH
Preparations
– Connect a video movie camera or another VCR to this VCR
as shown.
– Display the VCR picture on the TV.
– Insert the cassette on which the copying is to be performed,
and make sure that its erasure prevention tab is not broken
out.
– Select the audio source required by pressing the INPUT
SELECT button O to set A1 or A2.
A1: Through the AV1 (AUDIO IN/VIDEO IN)
sockets.
A2: Through the AV2 (AUDIO IN/VIDEO IN)
sockets on front panel.
– Use the L and R connectors for operations in the normal
(monaural) mode.
Recording VCR
AV1 (VIDEO IN b / AUDIO IN d)
AV2 (VIDEO IN \ / AUDIO IN ])
Other VCR or
Video movie camera
(Not supplied)
Other Monaural VCR or
Video movie camera
To Select the Recording Duration and
Perform Timer Recording (OTR Recording)
OTR means One-Touch Recording and is called this way,
because you can start recording and select the recording
duration by repeatedly pressing a single button. This is very
convenient, for example when you want to start recording
immediately but need to go out or want to go to bed.
After the selected recording duration has elapsed, recording
stops and the VCR automatically switches off.
To Perform an OTR Recording:
1
Display the VCR picture on the TV.
2 Insert a video cassette with an intact erasure prevention
tab.
3 Press the Channel buttons N to select the programme
position on which the TV programme to be recorded will
be broadcast.
4 Press the REC/OTR button Z to start recording.
5 Press the REC/OTR button Z repeatedly to select the
desired recording duration.
– Every time you press this button, the recording duration
indicated in the VCR display changes in the following
order.
– For example, if you select [30], the VCR records a
programme from that moment on for 30 minutes.
To Stop the OTR Recording Before the End:
Press the Stop button
F.
Notes:
– The OTR function works during normal recording and Direct
TV Recording.
– When the tape reaches its end during OTR recording, the
VCR will turn itself off.
30
(min.)
240
(min.) 180
(min.) 90
(min.) 120
(min.)
60
(min.) Counter display
(normal recording mode)
(continues on the next page)