Panasonic NV-FJ730 - Manual (Page 8)

8
Manual Tuning Procedure
1 Press the MENU button U to display the Main menu on
the TV screen.
2 Press the Cursor buttons (34) S to select [TUNER
PRESET] then press OK button T.
3 Press the Cursor buttons (34) S to select [CH] then
select the channel number you want tuned by pressing
the Cursor buttons (21)
S.
4 Confirm that [CLEAR] is set to [OFF].
5 Press the Cursor buttons (34) S to select [AUDIO
SYSTEM] then select the broadcasting system by
pressing the Cursor buttons (21)
S.
– BG: PAL B.G.H/SECAM B.G
– I: PAL I
– DK: PAL D/SECAM D.K.K1
6 Press the Cursor buttons (34) S to select [COLOUR
SYSTEM] then select [AUTO] by pressing the Cursor
buttons (21)
S.
– The VCR automatically distinguishes between PAL and
SECAM broadcasts.
– If the picture lacks colour when [AUTO] is selected,
select [MESECAM] or [PAL].
7 Press the Cursor buttons (34) S to select [SEARCH]
then press the Cursor buttons (21) S to start the
Manual Tuning.
– If the desired TV station has not been tuned, press the
Cursor buttons (21) S again.
– Press the MENU button U and repeat steps 3–7 for
each programme position you want to tune to a station.
CH 2
END: MENU
CH 2 SEARCH 74
END: MENU
SEARCH
Direct Tuning
Follow steps 1 to 3 of Manual Tuning Procedure.
4 Confirm that [CLEAR] is set to [OFF].
5 Press the Cursor buttons (34) S to select [SEARCH].
6 Press the Numeric buttons 2 to enter the number of the
desired programme position.
–
For other channels that require tuning, repeat
steps 3–6.
7 Press the MENU button U twice to exit the On Screen
Display.
Fine Tuning Procedure
Follow steps 1 to 3 of Manual Tuning Procedure.
4 Press the Cursor buttons (34) S to select [FINE] then
press the Cursor buttons (21) S to obtain the best
tuning condition.
– Press the OK button
T to return the tuning to its former
state.
5 Press the MENU button U to exit
the On Screen Display.
Blanking of Unused Programme Positions
Follow steps 1 to 3 of Manual Tuning Procedure.
4 Press the Cursor buttons (34) S to select [CLEAR] then
press the Cursor buttons (21) S to select [ON].
– Repeat steps 3–4 for other unused programme
positions to skip during the selection of programme
positions.
– To cancel the blanking of a programme position select
that programme position then set [CLEAR] to [OFF].
5 Press the MENU button U twice to exit the On Screen
Display.
CH 2 AFC: OK
FINE : END: MENU
On Screen Display
8 Press the MENU button U three times to exit the On
Screen Display.