Replacing the oven light bulb – Parkinson Cowan OVATION 60 GLXA User Manual

Page 36

Advertising
background image

If the ignition system doesn't work there may be a fault with the
electrical supply. First, check the socket by trying out another piece of
electrical equipment in it, if that works correctly renew the fuse in the
plug.

If the fuse keeps failing there is a fault in the cooker which must be

put right. Do not use a fuse with a rating higher than 3 amps. Do not
carry out other electrical work. Unplug the cooker and tell your installer.

Replacing the oven light bulb

You need a 25 Watt small Edison screw with a temperature rating of
T300.

l

Make sure the oven is cool before you replace a bulb.

l

Unplug the cooker.

l

Open the oven door and remove the oven shelves.

l

Place palm of hand at top of lens flat against oven side. Use fingers
to lever lens away from housing.

l

Unscrew the bulb by turning it to the left.

l

Fit a new bulb and then replace the glass bulb cover.

l

Replace the oven shelves.

l

Plug the cooker back into the electricity supply.

The oven light bulb is not covered by the manufacturers guarantee.

36

O V A T I O N 6 0 G L X a

General information

Advertising