Panasonic CF-P1Series - Manual (Page 28)

28
Resetting Your Computer
When the computer fails to respond to an operation, reset your computer. There are two
methods for resetting the computer.
Performing a Reset
This selection saves all stored records and entries and then restarts the
computer.
Unsaved data in open windows may be lost.
Push the reset switch using the stylus.
Performing an All Reset
This selection erases all stored records and entries and then restarts the
computer.
Therefore, never perform an all reset unless a reset does not solve your
problem.
(1) Push the reset switch using the stylus while holding down on the power
switch.
(2) At the confirmation message, press Y .
(3) Calibrate the touchscreen.
Dealing with Problems
Reset Switch
(4) When inputting all information (Date, time, and time zone):
1) Input the time zone and tap [Apply].
2) Input the date and time, and tap [Apply] or [OK].
When you input the time zone and tap [Apply], the date and time will automatically
be adjusted to accommodate the time difference.
For this reason, if the date and time are input first, it will be necessary to reset the
date and time after the time zone has been set.
When inputting date and time only:
Input the date and time, and tap [Apply] or [OK].