Panic mode – Python 702 User Manual

Page 24

Advertising
background image

25

© 2 0 0 6 d i r e c t e d e l e c t r o n i c s

The 2-way remote responds with the normal arm/disarm notifi-

cations in silent mode. (If the remote has beeps programmed

On, the remote will beep.)

panic mode

2-way remote

If you are threatened in or near your vehicle, you can attract

attention by triggering the system with your 2-way remote. Just

press

or

button for approximately two seconds, and

you will enter Panic Mode. The siren will sound and the parking

lights will flash for the programmed siren duration. To stop

Panic Mode at any time, press

or

button on the 2-way

remote again.

The 2-way LED remote responds with one flash of the Red LED

upon entering Panic Mode and two flashes of the Red LED

upon exiting Panic Mode.

4-button remote

If you are threatened in or near your vehicle, you can attract

attention by triggering the system with your transmitter. Just

press

or

for approximately two seconds, and you will

enter Panic Mode. The siren will sound and the parking lights

will flash for the programmed siren duration. To stop Panic

note: On both remotes the panic button is the same color.

Advertising