Python 702 - Manual (Page 40)

41 © 2 0 0 6 d i r e c t e d e l e c t r o n i c s
➤ Full trigger response 3 30 0 or 60 seconds: This determines how
long the full triggered sequence lasts. Some states have laws
regulating how long a security system can sound before it is
considered a nuisance. If your installer is programming the
security system with the Directed Bitwriter, the full triggered
response can be programmed for any duration ranging from
1 to 180 seconds.
➤ Nuisance Prevention ® Circuitry oon n or off: Please refer to the
NPC ® section of this manual for a complete explanation of
how NPC ® operates. If NPC ® is programmed off, the securi-
ty system will respond to inputs from any sensor indefinitely.
➤ Progressive door trigger oon n or off: When the system is armed
and a door is opened, the system responds with ten chirps
prior to beginning the full triggered sequence. If an instant
trigger is desired, the progressive door trigger can be pro-
grammed off.
➤ Valet ® pulse count: The number of presses of the Valet ®
button required to disarm the security system, AED, or the
VRS ® system can be programmed from one to five presses. The
default setting is oon nee press.
➤ Siren tones and chirp volume: The output of the Revenger ®
note: Because many states have laws regulating security
systems, programming NPC
® off may cause your system
to violate state laws.
note: This feature will only function if the Failsafe®
Starter Kill relay has been installed.