Panasonic MC-V7319 - Manual (Page 24)

- 24 -
Handle Adjustments
Using Tools
➢
ALWAYS place Carpet-Bare Floor
selector in Bare Floor (tools) position
when using tools.
➢ Remove wand from short hose by
twisting and pulling up.
➢
The tools can be attached to hose,
wand(s) or crevice tool.
➢
DO NOT overextend your reach with
hose as it could tip vacuum.
➢ To prevent tipping of vacuum, use
hose ring mount when cleaning areas
below upper cord hook with the
tools.
➢ The upholstery tool can be used with
or without brush.
Hose Ring
Mount
Support de
l’anneau
du tuyau
Soporte para la
manguera
Handle Release Pedal
Pédale de réglage de
l’inclinaison du manche
Pedal de liberación
del mango
Hose Ring
Anneau du tuyau
Anillo para la
manguera
Dusting Brush
Brosse à
épousseter
Cepillo para
sacudir
Upholstery Tool
Suceur pour
capionnage
Herramienta
para tapices
Telescopic Wand
Rallonge télescopique
Tubo telescópico
Crevice Tool
Suceur plat
Herramienta
para hendiduras
Short Hose
Tuyau court
Manguera
corta
Handle Release Pedal
Pédale de réglage
de l’inclinaison
du manche
Pedal de liberación
del mango
➢
Step on handle release pedal to
change handle position.
➢ Move vacuum to upright position for
storage and tool use.
➢
Move vacuum to middle position for
normal use.
➢ Use low position for cleaning under
furniture.