Planet Technology WAP-4000A - Manual (Page 22)

PLANET WAP-4000A User Manual
- 18 -
Figure17
Backup Settings: You can backup current settings to a file. Press “Backup” button, it will
prompt you a location to save the backup file (config.bin).
Restore Settings: When you try to restore the settings you have saved, please press
“Browse…” to find out the backup file and then press “Restore”.
Restore to default settings: It is used to reset WAP-4000A’s configuration to factory
default.
Firmware Upgrade: You can upload the newest firmware of the WAP-4000A. You may
either enter the file name in the entry field or browse the file by clicking the Browse button.
SNMP: Enable or disable the SNMP agent on the AP.
System Location: Description the location of the AP.
System Contact: Description the contact information for the person responsible for the
AP.
Community: SNMP system name for exchanging SNMP community messages. The
name can be used to limit SNMP messages passing through the network. The default
name is “public”.
Trap Receiver: Type the name of the destination PC that will receive trap messages.