Connecting cables on the rmx 1500, Connecting cables on the rmx 1500 -11 – Polycom RMX DOC2579D User Manual
Page 41
Advertising
Polycom RMX 1500/2000/4000 Getting Started Guide
2-11
Connecting Cables on the RMX 1500
To connect the cables:
•
For the RTM-IP 1500 module:
—
Connect the Media cable to LAN 2 port.
—
Connect the Network cables to the MNG (Signaling) port &
MNGB (Management Network) port.
—
(Optional) Connect the Shelf Management cable to the Shelf port.
•
For the RTM ISDN 1500 module:
—
Connect the E1/T1 cables to their PRI (1-4) ports.
Figure 2-1
RMX 4000 Rear Panel View with AC Power and Communication
Cables
E1/T1 PRI
Connection(s)
Power Cable
LAN 2; media, MNG; signaling,
MNGB; management & Shelf
The LAN 1, LAN3, LAN4 and Modem ports are not be used and the plastic caps
covering those ports should not be removed.
Advertising