Printek MTP300 - Manual (Page 18)

Daily Operation
Fault Messages
Paper Fault
This message is displayed and the Error Indicator flashes whenever the printer runs out of print media. This
may also occur if there has been a paper jam that prevents paper from feeding into the print head. To clear the
error, clear the jam and/or install new media and momentarily press the Paper Feed Button to resume printing.
For information on how to replace the media supply or to check for a possible jam, please refer to “Installing
Media” on page 4 in the Getting Started section of this manual.
It is also possible that a false paper fault may be detected when using “black mark” sensing on preprinted forms.
This condition should not occur unless the size of the black mark on the form is larger than the size allowed for
in the host application program. Please refer to the MtP Series Programmer’s Manual for more information.
Paper Door Open
This message is displayed and the Error Indicator flashes when the printer is attempting to print and the
Paper Door is not fully closed. To correct this error, make sure that the media is loaded properly, close the
Paper Door, and momentarily press the Paper Feed Button.
12