Planet Technology XRT-501 - Manual (Page 8)


3.2 DSL/ADSL modem (phone-type cable)
In this section you have to select one of these DSL/ADSL types that you will be
using to connect your XRT-501’s WAN port to your ISP (see screen below).
Parameter Description
3.2.1 PPPoE
Your ISP requires you to use a Point-to-Point Protocol over
Ethernet (PPPoE) connection.
3.2.2 PPTP
Your ISP requires you to use a Point-to-Point Tunneling
Protocol (PPTP) connection.
3.2.3 L2TP
Layer 2 Tunneling Protocol is a common connection method
used in xDSL connections.
3.2.4 Dynamic Your ISP will automatically give you an IP address.