Pioneer MVH-P8200BT - Manual (Page 41)

For details concerning operation, refer to the
XM tuner
’s operation manuals. This section
provides information on XM operations with
this unit which differs from that described in
the XM tuner
’s operation manual.
! With this unit, you can operate two addi-
tional functions: XM channel direct selec-
tion and preset channel list.
Basic Operations
Text
Text
Text
16:54 Category
XM1 1 112 P.CH CH
XM
A-EQ
1 1 1
3 3 3 2 2 2
1 Indicator display area
Refer to Indicator list on page 48.
2 Text information area
! Channel name
! Artist name
! Song title
! Band/Preset number/Frequency indica-
tor
3 Source image display
Selecting a channel (step by step)
1 Push M.C. left or right.
! If you push and hold M.C. left or right, you
can increase or decrease the channel number
continuously.
! You can also perform tuning from a desired
channel category. (Refer to Selecting a chan-
nel from a channel category on the next page.)
Switching the display off
1 Press and hold
.
Storing and recalling stations
Operations are basically the same as those of
the tuner. (Refer to Storing and recalling sta-
tions on page 14.)
However, the band selection method is differ-
ent from that of the tuner.
! Push M.C. down.
Band can be selected from
XM1, XM2 or XM3.
Selecting an XM channel directly
This function is available only for MVH-P8200BT.
When using the remote control, you can select
the channel directly by entering the desired
channel number.
1 Press DIRECT.
The channel number input display appears.
2 Press 0 to 9 to enter the desired channel number.
! You can cancel the input number by pressing
Clear.
3 Press DIRECT.
The channel of the entered number is selected.
! After entering the number input mode, if you
do not perform an operation within about
eight seconds, the mode is automatically can-
celed.
Function settings
1 Press M.C. to display the function
menu.
2 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
Channel Mode (channel select mode setting)
You have two methods for selecting a channel: by
number and by category. When selecting by number,
channels in any category can be selected. Select by
category to narrow your search down to only chan-
nels in a particular category.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.
All CH (channel number select setting)
—Cate-
gory (channel category select setting)
3 Press M.C. to confirm the selection.
En
41
English
Section
05 Available accessories